1

Bender station 

To bend copper busbars up to 160*15 mm  simultaneously 

2

Digital controller for bender

To give instructions to the bender station to reach to perfect results 

3

Digital controller for puncher and cutter

To give instructions to the puncher and cutter station to reach to perfect results 

5

Hydraulic Power Packs

Equipped with 3 power pack

4

Puncher station

To punch copper busbars up to 160*15 mm simultaneously

Model: HBC-A160 ES/EH

Copper Busbar Machine

3 in 1 Electrical Busbar Machine

3 in 1 Busbar Processing Machine
The most complete type of busbar machine is produced by Payapress company, which has all three processes of bending, cutting and punching simultaneously and with the utmost precision in compliance with the world’s standards. This device is equipped with a longitudinal digital ruler (linear encoder) in the bending section, which measures the displacement of the bending piston in each bending process is measured and by repeating it, you will be able to create bends of the same shape on the busbar. Also, this device is equipped with a spring back compensation system to create very precise bends. On the other hand, the cutting station of this device is equipped with center oriented guide that leads to the best result. This device has the most purchase among Payapress devices specially in the Europe region, and the reason is that this machine is capable of doing all of the main three processes (punching, cutting, bending) up to 15 × 160 mm which is the standard size in Europe, without any disruption. The machine’s puncher station is equipped with a laser center finder (Laser Pointer) and, upon request, in machines equipped with programmable length stopper, It can be programmed (can be programmed in the X and Y axis in the puncher and can be programmed in the Y axis in the cutter). This device model is also equipped with three separate power packs which allows you to work on every station at the same time to get precise results in a short time. This busbar machine is also equipped with the 4.0 industry technology which makes the possibility of connecting to the internet and getting feedback from every process at any time of the device.

INTRODUCTION

TECHNICAL INFORMATION

3 in 1 Busbar Machine Features

1- Copper puncher and cutter station of HBC-A160
The device in the puncher and cutter section is optionally equipped with programmable length stopper with the ability to save points required in a panel for the punching part along the X and Y axis as well as in the Y axis in the cutter station. Thus, by installing this option, there is no need to draw lines and points on copper busbars, also by reducing the operator’s intervention, human error in accuracy will be minimized. Also designing and manufacturing laser pointer in the puncher station of the device. increases the speed of the operation and the accuracy of the punching process, which the Payapress busbar processing machines have this capability along with the worldwide standards.

2- Bending Station
The bender of this device is equipped with two independent systems to achieve bending with high precision and repeatability to repeat bending process in a high number of times.
1-Rotary measuring system:
A rotary encoder with a pulse factor of 3600 pulses per revolution in couple is directly connected to the movable rotating plates of the bender.
2-Linear measuring system:
A digital ruler consists of a magnetic strip and a digital receiver attached to the end of the piston rod measures and controls the advance rate of the piston in each bending process.

HBC-A160-EH | HBC-A160-ES

MODEL

Cutting ,Punching and Bending Busbars Simultaneously Function
Up to 160 x 15mm Bender capacity
Up to 160 x 15mm Cutting capacity
Circle dies: M6 up to M18 Oval and Rectangle Dies (Optional) Punching capacity
Electronic Controller
High Accuracy Encoder
Bender controller
Step Mold (Optional)
Edge Bending Mold (Optional)
Twist Bending Mold (Optional)
End-Bending Mold (Optional)
Bender Molds
Laser Pointer Puncher center finder
Handy Length Stopper (EH)
Programmable Length Stopper (ES)
Length measuring in puncher and cutter
Three Separate Power Packs Double Acting System Hydraulic system
200 Bar Operating pressure
3 x 1.5 Kw Power rating
380 volt – 3/50 Hz Voltage
Hydraulic Oil H68 – 70 Liters Oil
200 x 110 x 100 (H) cm Main desk dimension
110 x 110 cm Roller desk dimension

FIND YOUR SOLUTION

FAQ's

Frequently asked questions

How much is the cost of this device?

HBC-A160 with an economical price is able to fulfill all of your needs regarding busbar processing. To get more information contact us through email or leave a message on website, our specialists will contact you ASAP.

What is the maximum busbar size that can get operate on this machine?

This device is capable of processing busbars Up to 15 × 160 mm

What is the "Programmable Length stopper"?

The programmable length stopper causes high accuracy in positioning of holes and cuts in puncher and cutter which is programmable for 20 positions.

What type of oil does this device requires?

The Type of oil that is used in this machine is Hydraulic Oil H68

How can I get more Information about these machines?

You can fill up the sections below and email us. our experts will help you ASAP.

the other way is to go to "contact us" and make a call or send an email to the mentioned email on the page.

GET FREE QUOTE

NEED

CONSULTATION?

Feel free to contact us and

ask your question, its absolutely free.

    Related Products

    5/5 - (46 votes)