Menu
Name: Busbar Fabrication Machine
Model: HBC-BE 120/160
- Bender controller equipped by spring back compensation system
- Digital bending indicator leads to perfect bending result
- Rotatable plates prevent fractions in busbar surface
- Z-shape mold :To create too closed bends in one stroke
- Edge bending mold :to bend busbar from edge side
- Twist bending mold : to twist busbar for special purpose
CHART
HBC-BE160 | HBC-BE120 | MODEL |
Bending babars | Bending busbars | Function |
Up to 160 x 15 mm | Up to 120 x 12 mm | Bender capacity |
Electronic controller High accuracy encoder | Electronic controller High accuracy encoder | Bender controller |
Z-shape mold(optional) Edge bending mold(optional) Twist mold(optional) End-bending mold(optional) | Z-shape mold(optional) Edge bending mold(optional) Twist mold(optional) End-bending mold(optional) | Bender molds |
Handy metering system Programmable metering System(optional) | Handy metering system programmable metering System(optional) | Length measuring in bende |
1 power pack Double acting system | 1 power pack Double acting system | Hydraulic system |
250 bar | 250 bar | Operating pressure |
1 x 1.5 Kw | 1 x 1.5 Kw | Power rating |
380 Volt-3/50 Hz | 380 Volt-3/50 Hz | Voltage |
Hydraulic oil H68 – 30 liters | Hydraulic oil H68 – 30 liters | Oil |
130 x 110 x 100(H) cm | 130 x 110 x 100(H) cm | Mail desk dimension |
PDF
Catalogue
![]() |
Dwonload English |