Electrical Panel
Including electrical components and units
Bender station
To bend copper busbars up to 120*12 mm simultaneously
HMI
To give directions and receive feedbacks from the device
Station Selector
To adjust to the desired Function. (Cutting, Punching, Bending)
Cutter station
To punch copper busbars up to 120*12 mm simultaneously
Handy Guide
To adjust X and Y axis manually
Puncher Station
To punch copper busbars up to 120*12 mm one by one
Auxiliary Desk
To give more space to insert longer busbars
무료 기술 견적 받기
"*" indicates required fields
3-in-1 경제형 부스바 머신
은(는) 현대적인 부스바 제작 요구에 최적화된 강력한 솔루션입니다. 절단, 펀칭, 벤딩 기능을 하나의 견고한 장비에 통합하여 소형 작업장부터 대규모 공장까지 적용 가능한 간소화된 공정을 제공합니다. 사용자 친화적인 설계와 합리적인 가격을 통해 고급 가공 기술에 대한 접근성을 높였습니다. 또한 3개의 개별 파워 팩을 탑재하여 여러 작업자가 서로 다른 스테이션에서 동시에 작업할 수 있습니다. 이 기능은 프로젝트 기간을 크게 단축하고 일관된 고품질의 결과를 보장하여, 효율성과 생산성 최적화를 추구하는 기업에 매우 가치 있는 설비가 됩니다.
INTRODUCTION
TECHNICAL INFORMATION
Economic Busbar Processing Machine Type A Features
Bender
– Bender controller equipped with spring back compensation system.
– Digital angle indicator leads to perfect bending result.
– Rotatable plates prevent fractions in busbar surface
Step mold (Optional)
– To create too closed bends in one stroke
– could be designed in different sizes by order
Edge bending mold (optional)
– To bend busbars from edge side
– Busbar size limit: 40 × 10 mm
Up to 90 degree and 50× 10 mm
Up to 45 degree
Twist bending mold (Optional)
– To twist busbars for special purpose
– Busbar size limits: 60 × 10 mm
Up to 90 degrees.
Puncher
Laser pointer helps to find the center of holes easily
– Easy and changeable dies
– Movable stripper plate prevents fraction in dies
– Double acting hydraulic system prevents sticking dies in busbar after punching
Guides could be moved up to center of dies
Rollers at two side of puncher for ease of busbar movement
Handy Length stopper with high accuracy adjustment
Circle dies from M6 up to M18
Oval and rectangle dies (Optional)
Cutter
– Precise cutting with high quality
– Perfect finishing after cutting
– Center oriented guide leads to the best result
– equipped with a centralizer clamp to help operator to find the center of the Busbar easily.
Rollers at two sides of cutter for ease of busbar movement
Handy Length Stopper with high accuracy adjustment
|
HBC-EA120EH |
MODEL |
|---|---|
| Cutting, Punching and Bending Busbars Simultaneously | Function |
| Up to 120 x 12 mm | Bender capacity |
| Up to 120 x 12 mm | Cutting capacity |
| Circle Dies: M6 up to M18, Oval and Rectangle Dies (Optional) | Punching capacity |
| Electronic Controller, High Accuracy Encoder | Bender controller |
| Step Mold (Optional), Edge Bending Mold (Optional), Twist Mold (Optional), End-Bending Mold (Optional) | Bender Molds |
| Laser Pointer | Puncher center finder |
| Handy Length Stopper (EH) | Length measuring |
| Three Separate Power Packs, Double Acting System | Hydraulic system |
| 200 Bar | Operating pressure |
| 3 x 1.5 Kw | Power rating |
| 380 Volt – 3/50 Hz | Voltage |
| Hydraulic Oil H68 – 70 Liters | Oil |
| 238 x 110 x 100 (H) cm | Main desk dimension |
FAQ's
Frequently asked questions
This machine allows operators to bend, cut, and punch busbars up to 120mm x 12mm.
Yes, the machine supports simultaneous operation across all three stations, allowing up to three operators to work at the same time.
상담이
필요하신가요?
편하게 문의해 주세요.
질문은 완전히 무료입니다.
"*" indicates required fields
관련 제품
"*" indicates required fields
