Busbar Punch Cutting Machine Features

Cutter station

The cutter station of this device is as precise and advanced as a whole busbar cutting machine.
The Cutting station of this device includes the following options:
– Precise cutting with high quality
– Perfect finishing after cutting
– Center oriented guide leads to the best result
Programmable Length Stopper cause high accuracy in positioning of cuts (optional)
– Could be programmed in absolute and incremental positions
– Programmable for 20 positions
– Rollers at two sides of cutter for ease of busbar movement
– Handy Length Stopper with high accuracy adjustment

Puncher station

Copper punching dies

In the punching process, the maximum busbar size that can be obtained is 15 x 160. If you use a larger size busbar, it may cause damage to the operator as well as damage to the punch section. The male and female dies are the main tools for punching and they are one of the most important and practical equipment of metal products and are made in different models. In all of them, the punching operation is done by two parts, the Male and female die, which punches the desired special shape from the raw sheet (Busbar). The location of the Male die is on the piston and the location of the female is on the main body. Do not use the punching station to make holes on materials such as iron, etc. because it will break the male and female dies and damage the machine.

Punch cutting machine indicator Control Panel

These panels are installed in both directions of the cutter and the puncher, and the relevant panel performs the manual and automatic movement of the longitudinal position of the cutter as well as the longitudinal and transverse position of the puncher.