Busbar Processing Machine
PAYAPRESS has been pioneering busbar processing machine company in electrical panel industry, serving panel builders, switchgear manufacturers and electrical contractors worldwide. Our busbar processing machines cover every core operation — cutting, punching and bending — so you can process copper and aluminum busbars in-house, from a single 3-in-1 unit to a complete busbar production line. The range below runs from premium simultaneous machines to economical single-motor models, giving you the exact busbar processing machine equipment your capacity and budget call for.
Our Busbar Fabrication Machine Range
From compact 120×12 mm setups to heavy-duty 200×20 mm processing, our HBC series covers every busbar size and workflow — all-in-one machining, dedicated cut-and-punch, or standalone bending.
HBC-A120/B120/CP120
These busbar fabrication machines line processes copper and aluminum busbars up to 120×12 mm
HBC-A160/B160/CP160
These busbar fabrication machines line processes copper and aluminum busbars up to 160×15 mm
HBC-A200/B200/CP200
These busbar fabrication machines line processes copper and aluminum busbars up to 200×20 mm
Find Your Busbar Processing Machine
Compare operations, throughput, and use cases across the HBC busbar processing machine lineup.
|
PREMIUM HBC-AA120 / A160 / A200 |
HBC-BB120 / B160 / B200 | HBC-CPCP120 / CP160 / CP200 | |
|---|---|---|---|
| Operations |
|
|
|
| Power packs | 3 | 1 | 2 |
| Simultaneous stations | 3 at once | 1 at a time | 2 at once |
| Max busbar size | 120*12 to 200*20 mm | 120*12 to 200*20 mm | 120*12 to 200*20 mm |
| ES/EH | |||
| Best-fit use case | Highest throughput — 3 operators | Cost-effective full processing | One Machine Two Operators Complete Workshop |
HBC-A Series
3-in-1 Busbar Machine
The PAYAPRESS HBC-A series are our flagship 3-in-1 busbar machines — a busbar cutting, punching, and bending machine that performs all three operations in one unit. Three separate motors (power packs) let three operators cut, punch, and bend at the same time, not in sequence — so one bar is being bent while another is punched and a third is cut, all simultaneously, for the throughput of three in a single footprint.
A Busbar Bending, Cutting, and Punching Machine
Working as a full busbar bending, cutting, and punching machine, one HBC-A replaces a saw, press, and bender — and unlike a standard 3-in-1 machine that still processes one bar at a time, the HBC-A's three independent power packs mean three operators can genuinely work in parallel, each running their own station without waiting on the others. It comes in three capacities — HBC-A120 (up to 120 × 12 mm), HBC-A160 (up to 160 × 15 mm), and HBC-A200 (up to 200 × 20 mm). As 3-in-1 busbar machine manufacturers and suppliers, PAYAPRESS offers each with a Handy manual or programmable automatic stopper.
Built for Panel Builders and Switchgear Manufacturers
The PAYA HBC-A is built for panel builders and switchgear manufacturers who need busbar prep to keep pace with panel assembly rather than slow it down. Control panel builders producing LV and MV switchgear rely on the machine's three independent power packs to cut, punch, and bend copper or aluminum bars for multiple panels at once, instead of queuing every bar through a single station. For busy panel-building workshops, that parallel workflow is often the difference between a busbar bottleneck and a smooth production line.
Where the HBC-A Series Is Used
Beyond the panel-building floor, the HBC-A is a common fixture wherever busbars are fabricated in volume. Switchboard manufacturers use it to prepare bars for distribution boards and motor control centers, while electrical enclosure fabricators turn to it for custom bus configurations in low- and medium-voltage cabinets. Wherever busbar cutting, punching, and bending are recurring, high-volume tasks — from OEM production lines to job-shop workshops — the HBC-A's three-operator capacity turns a sequential process into simultaneous output.
| Max length capacity | 120 X 12 mm |
|---|---|
| Working power | 5 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 3 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
| Max length capacity | 160 X 15 mm |
|---|---|
| Working power | 7 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 3 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
| Max length capacity | 200 X 12 mm |
|---|---|
| Working power | 12.5 KW |
| Max die | Ø26 mm |
| Max. Simultaneous Users | 3 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
HBC-B Series
Hydraulic Busbar Bending, Cutting, and Punching Machine
The HBC-B trades parallel stations for a single hydraulic power pack — cutting, punching, and bending still happen on the same machine, just in sequence rather than all at once. It's a busbar bending, cutting, and punching machine with the same capacity as its HBC-A sibling, at a fraction of the running cost.
Busbar Processing Machine for Leaner Budgets
One power pack means lower power draw, a lighter footprint, and a smaller price tag — without giving up a single operation. For workshops scaling into full busbar fabrication on a budget, the HBC-B is a practical busbar processing machine to start with.
Busbar Fabrication Machine for Switchgear Manufacturers
The HBC-B fits panel builders and switchgear manufacturers who need a full busbar cutting, punching, and bending machine but don't have the volume to justify parallel stations. Control panel builders working on LV/MV panel builds use it to prepare copper and aluminum bars one job at a time, without slowing down a smaller production line that doesn't need three operators running at once. For teams just starting to bring busbar processing in-house, it covers the same jobs as a saw, punch press, and bender combined — on a single machine and a single power pack.
Where the HBC-B Fits in the Industry
Switchboard manufacturers and electrical enclosure fabricators turn to the HBC-B for the same reason: consistent, in-house busbar fabrication without the footprint or running cost of a higher-throughput machine. It suits low- and medium-volume workshops preparing bars for distribution boards, control panels, and custom enclosures, as well as panel builders taking their first step away from outsourced busbar work. Wherever the job calls for cutting, punching, and bending on the same bar but not at the same time, the HBC-B handles it in one pass.
| Max length capacity | 120 X 12 mm |
|---|---|
| Working power | 2 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 1 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
| Max length capacity | 160 X 15 mm |
|---|---|
| Working power | 3 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 1 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
| Max length capacity | 200 X 20 mm |
|---|---|
| Working power | 12.5 KW |
| Max die | Ø26 mm |
| Max. Simultaneous Users | 1 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching Bending |
HBC-CP Series
Busbar Punching Cutting Machine
When bending isn't needed, the HBC-CP series is a dedicated busbar punching cutting machine. Two separate motors drive the cutter and puncher in parallel, so two operators work both stations at once — a major speed gain on high-volume cut-and-punch work. It comes as the HBC-CP120 up to 120 × 12 mm, HBC-CP160 up to 160 × 15 mm, and HBC-CP200 up to 200 × 20 mm, each with a programmable length stopper up to 20 positions for repeatable accuracy.
Busbar Punching Machine
As a busbar punching machine, the CP series places holes with a laser-guided center finder, using circle dies from M6 to M18, with oval and rectangle dies optional.
Busbar Cutting Machine
As a busbar cutting machine, it shears clean, burr-free busbar ends to length, with the same programmable stopper controlling every cut for consistent results.
Practical Machine Fit for Panel Builders
The HBC-CP is built for panel builders and switchgear manufacturers whose work is mostly cutting and punching, with bending only an occasional need. Control panel builders and switchboard manufacturers producing LV/MV panels don't always need a bender running — many jobs call for shearing bars to length and placing holes, nothing more. For that kind of workload, paying for bending capacity that sits idle most of the day doesn't make sense, and the HBC-CP is built around that reality: two dedicated stations, no bending overhead to buy or maintain.
Why Panel Builders Choose a Dedicated Cut and Punch Machine
For panel builders and electrical enclosure fabricators running high volumes of cut-and-punch work, the HBC-CP's two independent motors mean two operators work in parallel instead of queuing through a single station — a real throughput gain over a 3-in-1 machine doing the same two jobs one after another. And because it skips the bending unit entirely, it costs less to buy, less to run, and takes up less floor space than a full busbar bending, cutting, and punching machine. For a panel-building shop where most orders never touch the bender, that's capacity you're not paying for and don't have to manage.
| Max length capacity | 120 X 12 mm |
|---|---|
| Working power | 3.5 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 2 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching |
| Max length capacity | 160 X 15 mm |
|---|---|
| Working power | 4.5 KW |
| Max die | Ø20 mm |
| Max. Simultaneous Users | 2 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching |
| Max length capacity | 200 X 20 mm |
|---|---|
| Working power | 8.5 KW |
| Max die | Ø26 mm |
| Max. Simultaneous Users | 2 |
| Control | Manual (EH) / Automatic (ES) |
| Functions | Cutting Punching |
Why PAYAPRESS
Built to standard, supported worldwide
Built to international standards
Precision-engineered
1-year warranty
10-year after-sales support
Industry 4.0 ready
Our Partners
Global representative network
Where are our active representatives?
PAYAPRESS supports switchgear manufacturers across the GCC and beyond, with local representatives for sales, installation and service.
Europe
- Andorra
- Portugal
- Spain
- Turkey
- Ukraine
- Russia
Asia
- Japan
- Emirates
- China
- South Korea
South America
- Colombia
North America
- Canada
- United States
Oceania
- Australia
Need consultation?
Get a free technical quote
Tell us your busbar sizes and volumes — we’ll match you with the right HBC series and configuration, no guesswork required.
- Free, no-obligation technical quote
- Model recommendation for your busbar sizes
- Your data is safe — no spam, ever
- Talk to an engineer, not a call centre
Free technical quote
Tell us about your line — email is all we need
"*" indicates required fields
Frequently Asked Question
All you need to know about busbar fabrication machine
What is a busbar processing machine?
Industrial equipment that cuts, punches and bends copper and aluminum busbars for switchgear and panels — used once panel current passes ~125 A and busbars replace cables.
How is Type B (HBC-B160) different from Type A?
The HBC-B160 has one power pack, so the operator works one station at a time. Type A uses three power packs for simultaneous cutting, punching and bending.
Is the HBC-B160 an affordable bus bar machine?
Yes — a single power pack keeps both purchase and running cost low while still processing large 160 × 15 mm Cu/Al bus bars. Contact sales for current pricing.
Does the HBC-CP series bend busbars?
No — the CP series cuts and punches only. For bending, choose the 3-in-1 HBC-A or HBC-B, or the dedicated HBC-BE forming machines.
How can I get more Information about these machines?
You can fill up the sections below and email us. our experts will help you ASAP.
The other way is to go to “contact us” and make a call or send an email to the mentioned email on the page
How accurate is bending on the HBC-B160?
Two measuring systems — a 3,600-pulse rotary encoder and a 5-micron linear ruler — deliver repeatable, mark-free angles across high-volume runs.
Related Products
Other Products
.svg){kind=icon}
